Olympus PT-059 Underwater Case for TG-6 & OM System TG-7
This underwater housing made exclusively for the TG-6 and the new TG-7 can withstand pressure to a water depth of 45 m. Even when stored in the housing, the camera control dial can be used for exposure compensation. The front surface is black to prevent any unwanted reflections. The housing supports the use of two external flash units. PTWC-01* Underwater Wide Converter and PTMC-01* Underwater Macro Converter can be used with this case.
This underwater housing made exclusively for the TG-6 and the new TG-7 can withstand pressure to a water depth of 45 m. Even when stored in the housing, the camera control dial can be used for exposure compensation. The front surface is black to prevent any unwanted reflections. The housing supports the use of two external flash units. PTWC-01* Underwater Wide Converter and PTMC-01* Underwater Macro Converter can be used with this case.
This underwater housing made exclusively for the TG-6 and the new TG-7 can withstand pressure to a water depth of 45 m. Even when stored in the housing, the camera control dial can be used for exposure compensation. The front surface is black to prevent any unwanted reflections. The housing supports the use of two external flash units. PTWC-01* Underwater Wide Converter and PTMC-01* Underwater Macro Converter can be used with this case.
Specifications
Underwater pressure resistance - 45m
Compatible models - TG-6
Size (excludes accessories) Width - 157mm, Height - 122mm, Thickness - 81mm
lens port 52mm thread for accessory lenses such as the above
Weight - 484g
What's in the box?
PFCA-03 Optical cable adapter
POL-058 O-Ring
PFUD-08 LCD Hood
PRLC-14 Body Cap
PSOLG-2
Silicone Grease
SILCA-5S Silica gel
POSR-053
Optical fiber cable insertion slot cap
O-ring Remover
Hand strap
The Field Sensor System will not operate properly when the camera is installed in the underwater housing. Make sure to set the log lever to the off position when using the case.
Use together with silica gel for best results.