Specifications
Supported camera: TG-6
Supported adapter: CLA-T01
Variable magnification ratio: 0.3 x
Lens construction: 5 elements in 4 groups
Mounting system: Screw (φ40.5 mm)
Waterproof: Equivalent to IEC Standard publication 529 IPX8 (under Olympus test conditions), available in 20 m deep water
Dustproof: IEC Standard publication 529 IP6X (under Olympus test conditions)
Size: Maximum diameter φ53.4 mm
Total length: 34.6 mm
Weight: 141 g (without lens cap)
Box contents: Lens cap, lens rear cap, instruction manual
When attached to TG-6 with the zoom lever to the wide position
Focal length (35 mm equivalent focal length) 1.35 mm (8 mm) Angle of view180° (Circular) Focusing distance1 cm to ∞
Distance from the front of the FCON-T02 lens (1-O)
Angle of view (underwater) 122° (Circular) Focusing distance (underwater)1 cm to ∞
Distance from the front of the FCON-T02 lens (1-O)
When attached to TG-6 with the zoom lever to the x2.0 position
Focal length (35 mm equivalent focal length) 2.7 mm (15 mm) Angle of view169°
Note: short-side direction is 97°, long-side direction is 130°, diagonal direction is 169°
Focusing distance1 cm to ∞
Distance from the front of the FCON-T02 lens (1-O)
Angle of view (underwater)118° (Circular)
Note: short-side direction is 75°, long-side direction is 97°, diagonal direction is 118°
Focusing distance (underwater)1 cm to ∞
Distance from the front of the FCON-T02 lens (1-O)
Specifications are subject to change without notice.
The separately available CLA-T01 Conversion Lens Adapter needs to be attached.
Use without a lens filter.